One roller of this pair is always a driving one - magnetic (we offer it also in the version with a rotational speed control according to the character of cleaned material and exigencies of working) and the other non-magnetic is a driven one. This extraordinarily powerful magnetic separator consists either of a vibratory feeder (at VMSV version) or a feeding roller (at VMSV EKO version) and from several pairs of rollers being placed above each other. magnetic stainless steel or also some sorts of paramagnetic minerals). The magnetic roll separator fitted with extra strong magnetic rollers serves to a continuous and automatic separation even if the particles are very small and slightly magnetic (e.g. For more information, photos and videos CLICK HERE g., shredders, mills, grinders) from breakage. At the same time the magnetic drum protects the subsequent machinery (e.
The permanent magnet systems simplify the separation of ferrous particles, allowing for automatic recovery without production stoppage. The magnetic drum is a device for automatic and permanent removal of magnetic iron metals from inert materials. In this case we recommend that the clients opts for our overband magnetic separator DND-AC with automatic cleaning. For more information, photos and videos CLICK HERE If the material contains too many ferromagnetic particles, the magnetic plate is swiftly clogged with magnetic impurities. The ferrous particles accumulated on the surface of the magnetic plate are removed manually. The magnetic plate is suspended above the belt conveyor and the magnetic impurities are captured at the bottom of the magnetic plate (usually fitted with strong permanent ferrite magnets, however on client's requirement is is possible to use extremely strong neodymium NdFeB magnets). This permanent magnetic separator is suitable for materials with lower content of magnetic metal particles (if the cleaning is not required more often than once a work shift). Magnetic plate is the simplest and cheapest equipment for the separation of ferromagnetic particles from materials transported on a belt conveyor. Very quickly rotating magnetic poles create a changeable and relatively short magnetic field, which will magnetize each conductive particle being in this area for a limited time. The principle of the ECS-C Sollau separator (Eddy Current Separator-Concentric) of non-ferrous metals is based on the so-called eddy currents. From the magnetic point of view there is no difference between the standard version DND-AC and the economic version DND-AC EKO. Overband magnetic separator DND-AC EKO is a low-cost variant of an overband magnet. Overband magnetic separator DND-AC is designed to handle product stream with a high content of ferromagnetic particles (exceeding the limitation of standard suspended plate magnets). The laboratory highly magnetic separator, equipped with an extra strong magnetic roll,The extremely powerful magnetic separator MV-R is used for the continuous and automatic separation of weakly magnetic A magnetic pulley (sometimes called also a magnetic roller) is a device for automatic and permanent removal of magnetic iron metals from inert materials. The magnetic roll separator fitted with extra strong magnetic rollers serves to a continuous and automatic separation even if the particles are very small and slightly magnetic. From the magnetic point of view there is no difference between the standard version.The principle of the ECS-C Sollau separator (Eddy Current Separator-Concentric) of non-ferrous metals is based on the so-called eddy currents.Magnetic plate is the simplest and cheapest equipment for the separation of ferromagnetic particles from materials transported on a belt conveyor.
Overband magnetic separator DND-AC is designed to handle product stream with a high content of ferromagnetic particles.
0 kommentar(er)
